Page Comparison

Overview

IPMI_Local module is shipped as a part of Colocation Manager module allowing you to control the power of your IPMI-enable devices using ipmitool command installed on the same server as HostBill. In Colocation Manager it exposes following options:

• Power On
• Power Off
• Reset
• Power Cycle (off,wait,on)
• Identify

The module requires ipmitool to be already installed and configured/working.

Activating the module

1. If the Colocation Manager is included in your HostBill edition you can download it from your client portal.
2. If the Colocation Manager is not included in your HostBill edition you can purchase it from our marketplace and then download it from the client area.
3. Once you download the module extract it in the main HostBill directory.
4. Go to Settings → Modules → Hosting Modules, find and activate IPMI_Local module.

Connecting HostBill with IPMITool

1. Module requires HostBill queue to be enabled and running
2. Once the IPMI_Local module is activated you will be redirected to Settings → Apps to set connection. Note that you can create multiple connections if your devices use different configurations
3. Enter: 
   
   • • Name - Name of this connection/configuration
     • IPMI Port -  Specify if your devices using this connection are configured for IPMI on other than 623 port
     • IPMI Timeout - Specify timeout in seconds, default is 15 seconds if empty
     • IPMI Interface - Select IPMI interface to use.
     • IPMI Privilege - Force session privilege level to User/Operator/Admin level
     • Additional Options - Specify additional options to be passed to ipmitool before command
     • Test: IPMI IP - Only to test whether HostBill will be able to connect, enter IP of your device. Actual device details will be entered in Colocation Manager
     • Test: IPMI Username - Only to test whether HostBill will be able to connect. Actual device details will be entered in Colocation Manager
     • Test: IPMI Password- Only to test whether HostBill will be able to connect. Actual device details will be entered in Colocation Manager
4. Verify entered credentials by clicking Test Connection to check if HostBill can connect
5. Save Changes
   

Configuring Client Functions   

In Products & Services → Your Order Page → Your Product → Client Functions you will have option to enable IPMI Reboots client function.

If a device has IPMI configured in Colocation Manager (IP/username/password) and it is assigned to customer service, client will have option to Power On/Off/Reboot device using IPMI:

Connecting device to IPMI

1. In Colocation Manager ensure that in Configuration → Item categories your items have IPMI fields assigned
   
2. Go to related item, Update tab and enter device IPMI IP address, Username, Password
   
   
   
3. IPMI status will show next to device name, allowing you to refresh device status, run device ipmitool commands